Stage 1, 2 and 3 Blower Kits for the 2015-2017 F-150 5.0 L Coyote
We have everything you need to seriously upgrade the performance on your 2015-2017 F-150 5.0 L truck! Our VMP supercharger kits are available in Stage 1, 2 and 3 kits. You can choose which stage works best for you and your performance needs.
These kits come with our tried and true Gen II-R (Stage 1 and 2) and Gen3 head units (Stage 3). Stage 2 and 3 kits come with our humongous VMP dual-fan triple-pass heat exchanger. A VMP custom calibration is included with all three stage kits.
For those looking to upgrade, there are special brackets to mount the VMP heat exchanger. Factory harmonic balancer and AC pulley are 4-rib so 6-rib variants must be swapped in. The lower factory grille on the F-150 is solid. To get needed airflow, an open EcoBoost grille is recommended. To make up for the F-150’s lower compression ratio, smaller pulleys come standard in the kits.
Give us a call today if you want to get one of these powerful blower kits installed on your F-150.
Stage 1 Kit: This kit comes with the VMP Gen II-R 2.3 L TVS Supercharger, VMP TwinJet 60 mm throttle body, 56 lb/hr fuel injectors (other injectors available as options), VMP non-fanned heat exchanger, PMAS intake, 79 mm supercharger pulley, and all the needed brackets, hoses, sensors, pulleys and hardware. A VMP Performance custom calibration is included. An SCT device is available as an option.
Stage 2 Kit: Need a little more power? The Stage 2 kit includes a VMP Gen II-R 2.3 L TVS Supercharger, VMP TwinJet 67 mm throttle body, 56 lb/hr injectors (other injector options available), VMP dual-fan triple-pass heat exchanger, PMAS intake, 75 mm supercharger pulley, and all necessary brackets, hoses, sensors, pulleys and hardware. A VMP Performance custom calibration is included, and an SCT device is an option.
This is the kit that we run on our VMP Performance black quad cab F-150. With this setup, our VMP truck has gone 11.5 @ 120 MPH and makes about 550-650 whp depending on pulley size, drivetrain and fuel quality.
Stage 3 Kit: For even more power, this is the kit for you! Included is the VMP Gen3 2.65 L TVS Supercharger, VMP Twinjet 67 mm throttle body (160 mm and 173 mm Monoblades available), 1000 cc Fuel Injector Clinic fuel injectors (other injector options available), VMP dual-fan triple-pass heat exchanger, PMAS intake, 85 mm supercharger pulley, and all the necessary brackets, hoses, sensors, pulleys and hardware. Also included is a custom calibration from VMP Performance. SCT device is available as an option.
This is the way to get the best power with the same boost and less supercharger spin speed. As mentioned above, the 67 mm throttle body comes standard, but the VMP Performance offers a 160 mm Monoblade throttle body for race purposes, and a beastly 173 mm VMP Monoblade throttle body that supports 800+ whp pulley size, drivetrain and fuel quality.